However, for most tractors and regular loads, the standard hardware provided with the hooks is sufficient. Optional Backing Plates and Hardwareįor heavier applications, optional backing plates and additional hardware can be used to enhance the strength and stability of the bolt-on hooks. Refer to the provided proof testing page for detailed information on the hooks' load capacity. Ken's Vault bolt-on hooks have been tested and rated for various pound limits, ensuring their reliability and safety.

Testing the Strength and Load Capacityīefore putting the bolt-on hooks to use, it is essential to test their strength and load capacity.

The outer hooks are ideal for heavy-duty lifting or pulling, while the center hook is better suited for lighter applications. Depending on your tractor's model and the intended use of the hooks, you can choose between different mounting configurations. With the holes drilled and deburred, it's time to mount the bolt-on hooks and clevis mounts. This step is crucial to prevent injuries and ensure proper fitting of the bolt-on hooks. You can use a round file or a deburring tool to smooth out the edges of the holes. Using the Deburring ToolĪfter drilling the holes, it is essential to remove any burrs or sharp edges for a clean finish. Ensure that the holes are aligned with your markings and are deep enough for secure mounting. Alternatively, you can use a step drill bit for this purpose. Start by using a smaller drill bit to create a pilot hole, then switch to a 1/4 inch bit for a more precise hole. Once the bucket is taped and marked, it's time to drill the holes for the bolt-on hooks. The outer hooks should be aligned with the loader arms for maximum strength, while the center hook can be used for lighter lifting or securing purposes. Use a tape measure to mark the precise locations for the hooks. To avoid scratching the paint on your tractor's bucket, it is recommended to tape the areas where the hooks will be installed. You will need a drill, two 3/4 inch wrenches or sockets (or an impact driver), a tape measure, a round file or deburring tool, clamps, drill bits (preferably DeWalt Brad point bits), a pencil or Sharpie for marking, safety glasses, and optional backing plates (if required). Required Tools and Equipmentīefore you begin the installation process, gather the necessary tools and equipment. Ken's Vault takes great care in packaging their products to ensure their safety during transit. Inside the box, you will find the hooks, hardware, and detailed instructions. When you receive your bolt-on hooks, they will be neatly packaged in a priority mail box. Bolt-on hooks, in particular, are popular among tractor owners for their versatility and ease of installation. With their high-quality products and excellent customer service, Ken's Vault has become a trusted name in the industry.

Ken's Vault is a leading provider of tractor accessories, specializing in bolt-on hooks and other attachments. Introduction: Ken's Vault and Bolt on Hooks Whether you need to lift heavy objects, secure loads, or organize your tools, bolt-on hooks are a valuable addition to your tractor. Bolt-on hooks are a convenient accessory that allows you to easily attach and secure various items to your tractor's bucket. In this article, we will guide you through the process of installing bolt-on hooks on your tractor. Installing Bolt on Hooks on Your Tractor: A Step-by-Step Guide

Introduction: Ken's Vault and Bolt on Hooks.

Using step drill bits